To Use A Bluetooth Headset - NEC e616 User Manual

To use a Bluetooth headset

To
1 Start up the connection function
2 Register the headset to the handset
(pairing)
3 Put e616 in idle mode for Bluetooth
4 Prepare e616 for a Bluetooth
connection
Connections
Do this
Press the MENU key
Bluetooth.
If the headset is not yet registered on Bluetooth screen,
register it by the following procedures:
1 Put the headset in standby mode. (Refer to the instructions
manual of the headset for details.)
2 Press the Options menu key and select Search.
3 Execute the pairing with the detected headset, and then
enter Passkey. (Refer to the instructions manual of the
headset for details on the procedure and the PIN code)
When the authentication is complete, the headset is
registered to Bluetooth screen.
Note : Passkey referred to here is the Bluetooth PIN code for
the remote device (the headset). Refer to the
instructions manual of the headset for details.
Select All devices, or the registered device name for the
headset.
Place e616 within the communication range of the Bluetooth
device.
Note : Depending on the radio communication condition, you
may have to place the device nearer to e616.
Note : When there is a wall or an electric device in between the
Bluetooth device and e616, the connection may be
interrupted.
-120-
select External connection