Advertisement
FRA - Reglage du fin de course:
- Regler les 2 cammes C1 et C2 suivant la position désiré du battant.
- Effectuer quelques manoeuvres, pour vérifier le bon réglage du fin de course.
ENG - Limit switch regolation:
The limit switch goup is with indipedent cams. This group provides the motors stopping when the
door panel reaches the correct position. Its use is particolarly indicated if the number of consecuti-
ve operations of the automatic system is increased.
INSTALLATION
- Assemble the two microswitches to the micro of the motoreducer on the screw
and connect
the faston of limit switch cables.
- Assemble the two limit switch cams on the cams holder ring without tighten the screws
firmly.
- Mount the cams holder ring preassembled on the motor shaft but not very firmly. so that
the ring can be manually rotated.
- With the door closed, manually turn the cams holder ring so that one cam gets in contact
with closing micro being the farthest contact with respect to the balancing door. The other
cams will be turned upwards.
- Open the door. The other cam will be in contact with the closing micro. On the stroke of
this cam for a more precise regulation in order to obtain the door stopping in the correct
position, then firmly tighten the screw.
- Open and close the door for some times in order to check the correct operation of the
0limit switches.
Advertisement
