Epson GX-80 Operating Manual page 70

G-2
Characters per line:
H-1
c
INDEX
A
B
ASCII (American Standard Code for Information Interchange) 25-26
ASCII codes listed for all characters A-2
American Standard Code for Information Interchange See ASCII
Automatic test See self test
Cable 4
Cancelling codes 33
Changing pitch 20
Character sets international 45-46
table 46-47
Codes See ASCII codes, Control codes, <ESC> codes,
Embedded codes, Inserted codes
Combining print modes 41
Commercial software, use with 7, 27
Computer connection to 4
Condensed mode margin settings in 51-52
Condensed mode 11, 13, 21, 33, ASCII 15 turns it on;
ASCII 18 turns it off. Can also be set with SelecType
Connection to computer 4
Continuous-feed paper E-1-6
Control codes 25-28, A-3
Control key 28, A-4
Control panel 5-6, See also SelecType
Cut-sheet feeder option B-1, D-2-3
Beeper F-6
Bidirectional printing 20
Bold printing See double-strike, emphasized
Buzzer See beeper
132*
66*
160
Maximum characters per
line
80
40
96
48
Interface
Interface Asynchronous serial
Bit rate 9600 bps
Word length
Start bit 1 bit
Data bit 8 bits
Parity bit None
Stop bit 1 bit
Protocol DTR (flag control)
Pica
Pica expanded
Elite
Elite expanded
Compressed
Compressed expanded
Compressed elite
*137 if right margin is changed.
*68 if right margin is changed.