Epson GX-80 Operating Manual page 52

C-17
Explanation:
� ets the line spacing to n/72 of an inch (n dots) for subsequent
line feed commands. The vertical spacing of the dots on the
GX-80 is 1/216 of an inch. The value of n should be in the range O
to 85.
(n)
(n)
(n)
(n)
(n)
(n)
Set n/216 Inch Line Spacing
J
74
4A
3
51
33
n/216 Inch Line Feed for One Line
<ESC>
27
18
<ESC>
27.
13
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC
J
C-16
Explanation:
Advances the paper by one line at a spacing of n/216 of an inch
(n/3 dots). The value of n should be in the range O to 255. This
command does not send a carriage return with the line feed.
Explanation:
Sets the line spacing to n/216 of an inch (n/3 dots) for subsequent
<LF> commands. The "3" is the digit three and not the character
with ASCII code 3. The vertical spacing of the dots on the GX-80
is 1/216 of an inch. The value of n should be in the range Oto 255.
Format:
ASCII code:
Decimal:
. H exadecimal:
ESC
3
(n)
Explanation:
Sets the line spacing to 1/6 of an inch (12 dots) for subsequent line
feed commands. The "2" is the digit two and not the character
with ASCII code 2. This is the default at power on.
ESC 2
Set 1/6 Inch Line Spacing
ESC A (n)
Set n/72 Inch Line Spacing
Format:
Format:
ASCII code:
<ESC>
2
ASCII code:
<ESC>
A
(n)
Decimal:
27 50
Decimal:
27 65 (n)
Hexadecimal:
18 32
Hexadecimal:
13
41
(n)