Table of Contents
Advertisement
ESC
I
(c)
Select Vertical Tab Channel
ESC D (n1) (n2) (0)
Set Horizontal Tabs
Format:
Format:
ASCII code:
<ESC>
I
(c)
ASCII code:
<ESC>
D
(n1) (n2)
<NUL>
Decimal:
27
47
(c)
Decimal:
27
68
(n1) (n2)
0
Hexadecimal:
13
2F
(c)
Hexadecimal:
18
44
(n1) (n2)
00
C-22
Explanation:
This command is used to set the vertical tab channel, where c has
the value O to 6.
Explanation:
When this command is given the print head is advanced to the
next horizontal tab setting.
C-23
Explanation:
This command allows setting of up to 32 horizontal tabs. These
are entered as nl, n2, n3 etc (in the range 1 to 137) with the
<NUL> character as the terminator. The tab settings nl, n2, n3
etc must be entered in ascending order. The tab settings can be
cleared by executing the command with nl set to zero. The set-
tings on power up or after an <ESC>
@
command are every
eight characters.
ESCe
Set Tab Increments
Format:
ASCII code:
<ESC>
e
(n)
(s)
Decimal:
27
101
(n)
(s)
Hexadecimal:
18
65
(n)
(s)
Explanation:
This command sets the horizontal or vertical tab increments.
When n is O the horizontal tabs are set at intervals of s spaces.
Maximum values are 21 in pica, 25 in elite and 36 in compressed
text modes. When n is 1 the vertical tabs are set to s line feeds
where the line spacing is as defined in C.7 above.
Tab Vertically
Tab Horizontally
<VT>
11
OB
Ctrl K
<HT>
9
09
Ctrl I
VT
Format:
ASCII code:
Decimal:
Hexadecimal:
Control:
Explanation:
Advances the paper to the next tab setting in the channel selected
by <ESC> I c. If no channel has been set, channnel O is used. If
no vertical tabs have been set, the paper advances one line.
HT
Format:
ASCII code:
Decimal:
Hexadecimal:
Control:
Advertisement
Table of Contents
