Download Table of Contents Print this page

Epson GP-C831 Quick Printing Manual

Hide thumbs Also See for GP-C831:


Quick Links

Quick Printing Guide (for NiceLabel)


Table of Contents

Summary of Contents for Epson GP-C831

  • Page 1 Quick Printing Guide (for NiceLabel) M00087300 Rev.A...
  • Page 2 EPSON is a registered trademark of Seiko Epson Corporation. Exceed Your Vision is registered trademark or trademark of Seiko Epson Corporation. NiceLabel and NiceLabel Pro are registered trademarks or trademarks of Euro Plus d.o.o. in the United States and other countries.
  • Page 3 Overview This manual contains necessary information to print on Euro Plus "NiceLabel Pro 6.3.1" (NiceLabel), using GP-C831 or GP-M831. Here we will use the following print data as an example. Change the content based on the actual use environment.  Printed Information:...
  • Page 4 Install NiceLabel beforehand. See the NiceLabel manual for how to install and operate NiceLabel. See the "GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User's Guide" for details on how to use the printer and printer driver. Caution: The usage may differ when printing with a different version or edition of NiceLabel.
  • Page 5: Preparation Of The Printer

    Preparation of the Printer Insert the supplied CD into the computer, and set up the printer according to the setup tool instructions. Note: The printer driver is installed automatically if it has not been installed. After setup is complete, display the printer driver. Specify "User Defined Paper" as follows, and then click [Save].
  • Page 6 Specify the Media Type. Select "Plain Label", then click [OK].
  • Page 7: Preparation Of Nicelabel

    Preparation of NiceLabel Start NiceLabel to create a new label. Specify the printer. Select [EPSON GP-C831], then click [Next]. Note: When using GP-M831, select "EPSON GP-M831". Specify the Stock type. Select [<None>], then click [Next].
  • Page 8 Specify the Page size. Select "EPSON_LABEL" (media size you created using "Preparation of the Printer"), and then click [Next]. Specify the Orientation. Select [Portrait], then click [Next].
  • Page 9 Specify the Label layout dimensions. Specify as shown below, and then click [Next]. Setting Items Setting Value Label Width 200 mm Label Height 290 mm Top Margin 5 mm Left Margin 15 mm Follow the wizard instructions to create the document.
  • Page 10: Creating Label Design

    Make sure you have the top and bottom margins of 1.5 mm and more, and left and right margins of 2.0 mm and more inside the label size. Cautions:  The maximum printable width for GP-C831 and GP-M831 is 216.2 mm.  Data placed in the position more than 216.2 mm from the left edge of the media is not printed. 216.2 mm...
  • Page 11: Barcode Settings

    Barcode Settings In the barcode properties, set the Narrow bar width to more than "4" dots. Note: When printing a barcode, there are recommended conditions according to the Media Type. If the recommended conditions are not followed, the printed barcode may not be read properly. For the recommended conditions, see the appendix.
  • Page 12: Recommended Conditions Of The Barcode

    *: You can set the ratio when the barcode type is Codabar, CODE39, Interleaved 2 of 5, or MSI. Fence bar code Ladder bar code Cautions:  The above values are valid when using paper recommended by EPSON.  Before using the barcode, print the barcode and check the scan quality.
  • Page 13: Barcode Font Of The Printer Driver

    TrueType font. Notes:  For more details on how to set the printer driver, see "GP-C830/GP-M830/GP-C831/GP-M831/GP-C832/GP-M832 User's Guide".  The barcode is displayed as text data on the NiceLabel screen and is not displayed as a barcode image. When you...

This manual is also suitable for:


Table of Contents