Epson GX-80 Operating Manual page 54

C-20
Explanation:
The bottom margin is set to zero lines. This means printing will
continue to print over the perforation when printing a listing, for
example, when no counting of the lines is being carried out by the
computer.
C-21
<NUL>
0
00
Set Vertical Tabs
(n1) (n2)
(nt)
(n2)
(nt)
(n2)
<ESC> 8
27 66
18 42
ESC b (c) (n1) (n2) (0)
Set Vertical Tabs in Channels
Format:
ASCII code:
<ESC>
b
(c)
(n1) (n2)
<NUL>
Decimal: 27
98
(c)
(n1) (n2)
0
Hexadecimal:
18 62
(c)
(n1)
(n2)
00
Explanation:
This command allows setting of up to 16 vertical tabs. The tabs
can be set in 8 channels using the <ESC> b command. This
command sets the tabs in channel 0. These are entered as nl, n2,
n3 etc (in the range 1 to 254) with the <NUL> character as the
terminator. The tab settings nl, n2, n3 etc must be entered in
ascending order. The tab settings can be cleared by executing the
command giving a value of zero to nl. Altering the line spacing
after giving this command does not affect the absolute position of
the tab setting.
Explanation:
This command allows setting of up to 16 vertical tabs. The tabs
can be set in 8 channels ( the range of c is O to 8). The channel set
by <ESC> bis channel 0. These are entered as nl, n2, n3 etc (in
the range 1 to 254) with the <NUL> character as the terminator.
The tab settings nl, n2, n3 etc must be entered in ascending
order. The tab settings can be cleared by executing the command
giving a value of zero to nl. Altering the line spacing after giving
this command does not affect the absolute position of the tab
setting.
Format:
ASCII code:
Decimal:
Hexadecimal:
C.9 Page Format
ESC B (n1) (n2) (0)
0
79
4F
Cancel Skip Over Perforation
<ESC>
27
18
Format:
ASCII code:
Decimal:
Hexadecimal:
ESCO