Clean Casing Of Your Projector; Clean The Filter - Eiki EK-361WST Owner's Manual

Clean your projector when it is contaminated by foreign matter or its display effects are getting
worse.
Note:
!
Unplug the AC power cord before any cleaning operation.

Clean casing of your projector

Wipe the casing surface with clean and soft
cloth. Gently wipe the casing with clean and
soft cloth dampened with small amount of
neutral detergent to remove heavy dirt. Do
not over apply cleaner to the casing. Abrasive
cleaner, solution, or other rough chemical may
scratch the casing surface.
Place your projector in proper container after
use to protect it from dirt and dust and being
scratched.

Clean the filter

The filter is designed to keep dust from enter-
ing in your projector, which may lead to dusts
accumulated on surface of internal compo-
nents. Clogged filter may reduce cooling fan
effects, which, in turn, will overheat your pro-
jector and shorten its life cycle. Clean the filter
immediately whenever the Filter Warning icon
displays.
Please follow these steps to clean your filter:
1 Power off your projector and unplug from
AC power source.
2 Release the screw at bottom case and then
remove the filter cover to take the filter out.
3 Gently clean the filter with a brush.
4 Insert the filter. Make sure it has been fully
inserted.
Note:
!
Do not insert any small object in the air outlet. It may fail your projector.
64
Regular maintenance