Table of Contents
Advertisement
Chapter 3 Configuring the Device
3.
Enter netscreen in both the Admin Name and Password fields, then click
Login. (Use lowercase letters only. The Admin Name and Password fields are
both case sensitive.)
The NetScreen WebUI application window appears.
Note:
you are using NSM, you can optionally configure Juniper appliances with Rapid
Deployment. Refer to the Rapid Deployment Getting Started Guide for more
information.
U
W
SING THE
EB
The WebUI contains wizards you can run to configure the NetScreen-5XP:
•
The Initial Configuration wizard allows you to set the operational mode, and
depending upon which mode you select, configure basic configuration and
management options. When you use the WebUI to access the device for the first
time, the Initial Configuration wizard appears.
•
The Outgoing Policy wizard allows you to configure rules that tell your
NetScreen device what kind of services users on your network (the Trust zone)
are allowed to access on outside computers (the Untrust zone).
•
The Incoming Policy wizard allows you to configure rules that tell your
NetScreen device the services and computers that users on outside computers
(the Untrust zone) are allowed to access on your network (the Trust zone).
•
The VPN wizard allows you to create and configure a Virtual Private Network.
In the WebUI, select the appropriate option under Wizards.
14
NetScreen-Security Manager 2004 and NetScreen Rapid Deployment: If
UI W
IZARDS TO
C
ONFIGURE THE
D
EVICE
User's Guide
Advertisement
Table of Contents
