Claim, Onboard, And Configure Srx2300 - Juniper SRX2300 Hardware Manual

3. Push the power cord retainer on to the power cord.
4. If the AC power source outlet has a power switch, turn it off.
5. Plug the power cord into an AC power source outlet.
6. If the AC power source outlet has a power switch, turn it on. The firewall diesn't have a power switch
and powers on as soon as you plug it in.

Claim, Onboard, and Configure SRX2300

SUMMARY
This topic provides you the pointers to onboard and configure SRX2300 firewalls using Juniper®
Security Director, or configure SRX2300 firewalls using J-Web or Junos OS CLI.
If you have a Juniper® Security Director license, you can follow a few simple steps to get an SRX2300
up and running on the Juniper® Security Director Cloud portal. See
information.
Table 1: Onboard and Configure SRX2300 Using Juniper® Security Director
If you want to
Claim and onboard to Juniper® Security Director
Cloud
Table 1 on page 6
Then
See Onboard SRX Series Firewalls to Security Director
Cloud
for more
6