Labels - Xerox VersaLink B600 User Manual

Paper and Media
6. Slide the tray all the way into the printer.
7. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper type, size and color.
a. If the paper type, size and color are correct, touch O O K K .
b. If the paper type, size or color are incorrect, change the settings.
• To select a paper type, touch the current paper type, then from the list, select E E n n v v e e l l o o p p e e .
• To select a size, touch the current size setting, then from the list, select C C u u s s t t o o m m . Touch the Length field
and select a number value. Touch the Width field and select a number value. Select O O K K .
• To select a different color, touch the current paper color, then from the list, select the color.
c. To save the settings, touch O O K K .
8. From the Print dialog at your workstation, select the paper setting values and click O O K K . To feed and print the
envelopes, click P P r r i i n n t t .
L A B E L S
You can print labels from the Bypass Tray or Tray 1.
Guidelines for Printing Labels
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full-sheet labels only.
• Store unused labels flat in their original packaging. Leave the label sheets inside the original packaging until
ready to use. Return any unused label sheets to the original packaging and reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing labels in
extreme conditions can cause print-quality problems or cause labels to jam in the printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam in the
printer.
• In the print driver software, select Label as the paper type.
126
Xerox ® VersaLink ® B600/B610 Printer User Guide