Product Overview - Jasic EVOLVE200 PLUS User Manual

1. Product overview

IN CASE OF BAD OPERATION YOU DEMAND THE
WARNING
IMPORTANT: BEFORE STARTING THE EQUIPMENT, READ THE CONTENTS OF THIS MANUAL,
WHICH MUST BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR THE ENTIRE OPERATIVE LIFE
SPAN OF THE MACHINE.THIS EQUIPMENT MUST BE USED SOLELY FOR WELDING
SHENZHEN JASIC TECHNOLOGY CO., LTD. solemnly promises:
This product is manufactured according to relevant standards of China and relevant international standards, and
meets safety standards such as GB15579.1, IEC 60974-1, EN 60974.1, AS 60974.1 and UL 60974.1.
2014/35/EU (LDV) – 2014/30/EU (EMC) – 2002/95 (RoHs) and with the instructions contained in the harmonized
standard, if applicable: EN 60974-1 EN 60974-2 EN 60974-3 EN 60974-5 EN 60974-7 EN 60974-10 EN 60974-12
Relevant design plans and manufacturing technologies of this product are patented.
Operate after reading this manual carefully.
1. JASIC has the right to revise this manual at any time without prior notice.
2. Though contents in this manual have been carefully checked, inaccuracies might have occurred. For any
inaccuracy, please contact us.
3. This manual was released in Dec, 2021.
SHENZHEN JASIC TECHNOLOGY CO., LTD.
Address: No. 3, Qinglan 1st Road, Pingshan District, Shenzhen, Guangdong, China
Postcode: 518118
Tel: 0755-29651666 Fax: 0755-27364108
Website: http://www.jasictech.com E-mail: sales@jasictech.com
EVOLVE200 PLUS USER MANUAL
ATTENDANCE OF QUALIFIED STAFF
1
OPERATIONS.