Ginlong solis S6 Series User Manual page 22

4. Installation
4.7.5 DRM Port Connection (Optional)
4.7.5.1 For Remote Shutdown Function
Solis inverters support remote shutdown function to remotely control the inverter
to power on and off through logic signals.
The DRM port is provided with an RJ45 terminal and its Pin5 and Pin6 can be used for
remote shutdown function.
Short Pin5 and Pin6
Open Pin5 and Pin6
Rj45 plug
Figure 4.24 Strip the insulation layer and connect to RJ45 plug
4.7.5.2 For DRED Control Function (For AU and NZ Only)
DRED means demand response enable device. The AS/NZS 4777.2
inverter need to support demand response mode(DRM).
This function is for inverter that comply with AS/NZS 4777.2
A RJ45 terminal is used for DRM connection.
Assignment for inverters capable
Pin
of both charging and discharging
1
2
3
4
Signal
1--8
RJ45terminal
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Switch_input1
DRM(logic interface)
DRM 1/5
DRM 2/6
DRM 3/7
DRM 4/8
Inverter Generates
Inverter Shutdown in 5s
Table 4.4
Correspondence between the cable s
and the stitch es of plug, Pin5 and Pin6
of RJ45 terminal is used for the logic
interface, other Pins are reserved.
Pin 1: Reserved; Pin 2: Reserved
Pin 3: Reserved; Pin 4: Reserved
Switch_input2
Pin 5: Switch_input1; Pin 6: Switch_input2
Pin 7: Reserved; Pin 8: Reserved
Assignment for inverters capable
Pin
of both charging and discharging
5
6
7
8
Table 4.5
21
User Manual
Function
:2020 required
:2020 standard.
RefGen
Com/DRM0
V+
V-