Ginlong solis S6 Series User Manual page 18

4. Installation
4. Push Housing into Body.
5. Insert Seal and Clamp Finger into socket ,then tighten the nut , torque 4+/-0.5N·m.
6. The same installation for both cable end plug and socket connectors.
7. Mating plug and
socket: Push the plug into the socket completely, then rotate the
locker according to the direction instructed by the marks on the
locker.
NOTE:
Before mating the plug and socket, please double check both AC Grid and
AC Backup connectors. Do not connect the grid cables to the AC Backup
port or connect the backup load cables to the AC Grid Port.
Otherwise, it may leads to malfunction or damage.
Click
Figure 4.17
Figure 4.18
Figure 4.19
17
User Manual