Ginlong solis S6 Series User Manual page 11

4. Installation
4.2 Mounting the Inverter
Dimensions of mounting bracket:
Once a suitable location has be found accordingly to 4.1 using figure 4.3 mount the wall
bracket to the wall.
The inverter shall be mounted vertically.
The steps to mount the inverter are listed below:
1. Select the mounting height of the bracket and mark the mounting holes.
For brick walls, the position of the holes should be suitable for the expansion bolts.
2. Lift up the inverter (be careful to avoid body strain), and align the back bracket on the
inverter with the convex section of the mounting bracket. Hang the inverter on the
mounting bracket and make sure the inverter is secure (see Figure 4.4)
WARNING:
The inverter must be mounted vertically.
3-OB11*6.8
Figure 4.3 Inverter wall mounting
Figure 4.4 Wall Mount Bracket
407.5
358
322
Punch position
23
358
10
Φ6.8
User Manual
unit:mm