Ginlong solis S6 Series User Manual page 14

4. Installation
3. Pass the stripped DC cable through the nut and waterproof rubber ring.
Positive terminal
Negative terminal
4. Connect the wire part of the DC cable to the metal DC terminal and crimp it with a special
DC terminal crimping tool.
Positive terminal
Negative terminal
5. Insert the crimped DC cable into the DC terminal firmly, then insert the waterproof rubber
ring into the DC terminal and tighten the nut.
Positive terminal
Negative terminal
Figure 4.8
Figure 4.9
After you hear a "click", pull gently to check for a firm engagement.
Figure 4.10
13
User Manual
Squeeze
Click
Tighten