Unpacking And Setting Up The Cash Register; Standard Accessories - Olivetti ECR 6800 Service Manual

2. UNPACKING AND SETTING UP THE CASH REGISTER

2.1 STANDARD ACCESSORIES

The cash register comes with the following items:
• One black plastic journal winder spindle
• One roll of standard paper tape
• Three standard "AA" size batteries for the battery back-up system
• The multilingual User's Guide, Reference Guide in English and Warranty Card
• A set of keys for locking the cash drawer and for locking the printer and management control switch cover.
Make sure that the cash register and all of the above items are included in the shipping carton.
Open the cash register's shipping carton and carefully withdraw each component. Make sure that the cash
register and all of its accessories, listed in the section entitled Standard Accessories, are present in order to
setup the cash register by following these guidelines:
1. Place the cash register on a level, stable, vibration-free and dust-free surface. Make sure it is near a power
outlet compliant will the latest safety standards.
2. Plug the cash register into a power outlet compliant with the latest safety standards.
3. Insert memory backup batteries as explained in the section entitled Inserting/Replacing Batteries. Do not
insert the batteries unless the cash register is plugged into an electrical power outlet.
WARNING: The machine must be plugged into an electrical outlet before you insert the batteries.
4. Load the thermal paper roll as explained in the section entitled Loading Thermal Paper.
5. Set the desired program options as explained in the section Cash Register Programming.
6. Once the desired program options have been programmed, set the control switch to the REG1 (journal record)
or REG2 (customer receipt) position and you are ready to work with the cash register.
In the REG1 position the cash register will not print the programmed receipt header.
Y108540-8 Service Manual 2-1