UNPACKING AND SETTING UP THE CASH REGISTER
STANDARD ACCESSORIES
The cash register comes with the following items:
•
One black plastic journal winder spindle
•
One roll of standard paper tape
•
Three standard 'AN' size batteries for the battery back-up system
• The multilingual User's Guide, Reference Guide in English and Warranty Card + Setup
Poster
• A set of keys for looking the cash drawer
Make sure that the cash register and all of the above items are included in the shipping canon.
Open the cash register's shipping carton and carefully withdraw each component. Make sure
that the cash register and all al its accessories, listed in the section entitled Standard
Accessories, are present in order to setup the cash register by following these guidelines:
1.
Place the cash register on a level, stable, vibration-free and dust-free surface. Make sure it
is near a power outlet compliant will the latest safety standards.
2.
Plug the cash register into a power outlet compliant with the latest safety standards.
3.
Insert memory backup batteries as explained in the section entitled Inserting/Replacing
Batteries. Do not insert the batteries unless the cash register is plugged into an electrical
power outlet.
WARNING: The machine must be plugged into an electrical outlet before you insert the
batteries.
4. Load the thermal paper roll as explained in the section entitled Loading Thermal Paper.
5. Set the desired program options as explained in the section Cash Register Programming.
Y108540-8
ECR 7900 Service Manual
5
Need help?
Do you have a question about the ECR 7900 and is the answer not in the manual?