Ballard Designs Kelley MO512 Quick Start Manual

Desk 30 1/2”h x 58”w x 30”d

PRODUCT NAME: Kelley Desk

ITEM NUMBER: MO512

ASSEMBLED DIMENSIONS: 30 1/2"H x 58"W x 30"D

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

UPDATED: 9-1-2022

Prevent accidentally discarding small parts or

hardware. Retain all carton contents until assembly

and installation are complete.

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

IMPORTED

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the Kelley MO512 and is the answer not in the manual?

Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Kelley Desk ITEM NUMBER: MO512 ASSEMBLED DIMENSIONS: 30 1/2”H x 58”W x 30”D Prevent accidentally discarding small parts or hardware. Retain all carton contents until assembly and installation are complete. PRODUCTS ARE NOT INTENDED IMPORTED FOR COMMERCIAL USE.
Page 2 Assemble in location for intended use. Legs Ltr. Qty. Hardware Included Hardware Short Bolts 5/16” 1 1/8” Long Bolts 5/16” 2” Lock Washers REQUIRED TOOLS: 9/16” Phillips Screwdriver, Rubber Mallet, Large Flat Washers Allen Wrench (included) 3/4” -Two person assembly suggested. Small Flat Washers 5/8”...
Page 3 Assemble in location for intended use. STEP 1: Remove left and right drawers from Top (J) then invert Top onto a level, padded surface. Attach Left Leg (K) and Right Leg (L) by inserting Short Bolts (A) with Lock Washers (C) and Large Flat Washers (D) through hole INSIDE each drawer compartment and into embedded T-nuts in each Leg.
Page 4 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.