Advertisement
Mounting
Note that figures are for illustrative purposes only.
* * Note that for JZ20-J modules those dimensions are 7.5 mm (0.295").
Model
JZ20-xxx\JZ20-J-xxx
Add-on modules-
Available by separate order for
communication and cloning.
Note: the USB port and an Add-on module cannot be physically connected at the same time.
Add-on: during installation
Installing an Add-on module requires sufficient clearance space
72 mm (2.835")
DIN-rail mounting
Snap PLC onto the DIN rail
Note: Removing the unit requires clearance space. Recommendation: approximately 40mm (1.58")
2
Dimensions
Cut-out
117 x 89mm (4.606"x 3.504")
Add-on: after installation
Installation Guide
View area
66 x 19.2mm (2.598"x 0.755")
Integral USB Port
This may be used for
programming purposes.
USB Port
Panel mounting
Unitronics
Advertisement
