Unitronics Jazz JZ20-UA24 User Manual page 10

JZ20-UN20/JZ20-J-UN20 Analog Inputs
Note: Shields should be connected at the signal source.
Analog Input wiring, current, 2 wire, AN1
Analog Input wiring, current, 4 wire, AN1
Thermocouple
▪ Thermocouple 0: use T- Input as
negative input and T+ as positive.
10
Analog Input wiring, current, 3 wire, AN1
Analog Input wiring, voltage, AN2 and AN3
Type Temp. Range
mV -5 to 56mV
200 to 1820˚C
B
(300 to 3276˚F)
-200 to 750˚C
E
(-328 to 1382˚F)
-200 to 760˚C
J
(-328 to 1400˚F)
-200 to 1250˚C
K
(-328 to 2282˚F)
-200 to 1300˚C
N
(-328 to 3214˚F)
0 to 1768˚C
R
(32 to 3214˚F)
0 to 1768˚C
S
(32 to 3214˚F
-200 to 400˚C
T
(-328 to 752˚F)
Installation Guide
Wire Color
ANSI BS1843
(USA) (UK)
+Grey +None
-Red -Blue
+Violet +Brown
-Red -Blue
+White +Yellow
-Red -Blue
+Yellow +Brown
-Red -Blue
+Orange +Orange
-Red -Blue
+Black +White
-Red -Blue
+Black +White
-Red -Blue
+Blue +White
-Red -Blue
Unitronics