Table of Contents
Advertisement
4.2 Supported Devices
To ensure emergency communication in the lift, we recommend that 2N
interconnected with the 2N
we recommend that the M3065-V or P9106-E IP cameras supplied by Axis should be used.
4.3 Maintenance
The battery pack state is absolutely essential for the operation of the main unit and connected
cabin units.
Operation Interruption and Battery Replacement
A new 9Ah or 18Ah lead-acid AGM battery can only be used for replacement.
Battery disconnection and replacement:
1.
Disconnect the main unit from the mains supply. Remove the upper cover (refer to
Electric
Installation).
2.
Disconnect the FASTON cable terminals connecting the battery with the motherboard.
3.
Slide the old battery out and replace it with a new one.
4.
Interconnect the battery with the motherboard using the FASTON cable and reconnect the
mains supply.
5.
Replace the upper cover and tighten the cover fitting screws. Make sure that the
grounding wire is connected with the cover while replacing the cover!
6.
Confirm the new battery installation and complete the installation date in the
Maintenance / Battery Installation tab on the web interface.
Caution
•
Never keep the battery pack discharged too long.
•
When completely depleted, the battery should be recharged as soon as possible.
•
It is necessary to replace the battery pack with a new one every 2 years to ensure
power failure backup.
®
LiftIP communicator.
2N® LiftGate User Manual
To ensure the lift cabin video surveillance,
®
LiftGate should be
2.3
67 / 85
Advertisement
Table of Contents
