Table of Contents
Advertisement
• An improper placing of 2N
high-frequency sensitive devices may have an adverse affect on their functionalities.
Caution
•
Make sure that you have all requisites for putting 2N
card, LAN-PC interconnecting cable).
2.2 Mechanical Installation
It is recommended that the 2N
unauthorized persons, such as the machine room, substation, etc. If the unit is installed on an
easily accessible place, the Internet access or SIM cards can be misused.
®
Mount the 2N
LiftGate main unit on a wall using the provided dowels and
the main unit higher than 2 m from the ground for safety
mm (6.9") and insert the dowels. Put the screws through the device box metal profile holes and
tighten them into the dowels in the wall.
®
LiftGate or the antenna near television, broadcasting or other
®
LiftGate main unit is installed in a room secured against
2N® LiftGate User Manual
®
LiftGate in operation (SIM
screws. Do not install
reasons. Drill 2 holes spaced apart 176
13 / 85
Advertisement
Table of Contents
