Retrieval Of 2N® Liftgate In Network By 2N® Network Scanner - 2N LiftGate User Manual

Factory Default Reset
Press the RESET button 5 times to reset the factory defaults; the device will be restarted after
the factory reset.
Restart
Press and hold the RESET button for approx. 4 s (until all the LEDs go off and the left LED starts
shining blue). The main unit system will be restarted if powered from the mains or turned off if a
battery supply is used.

Note
• The beginning of the factory default reset / restart is signaled by all the LEDs going
off and gradually by each LED going on and off separately from left to right. After
the row is completed, the left LED goes on and off again.
2.7 Retrieval of 2N® LiftGate in Network by 2N® Network Scanner
Use the administration web server to configure 2N
a LAN cable making sure that the device is being powered.
2N® LiftGate User Manual
®
LiftGate. Connect 2N
®
LiftGate to a PC using
21 / 85