•
Factory reset – reset the configuration default values. By confirming the factory default
reset the device restart will be forced automatically.
•
3.3.1 Restart
•
3.3.2 Firmware
•
3.3.3 Battery Installation
•
3.3.4 Log
3.3.1 Restart
The Restart tab is used for forcing the 2N
•
CONFIRM RESTART – an immediate system restart is performed.
Caution
•
Should the main unit system be turned off (or restarted) unintentionally, including
simultaneous disconnection of external and battery supplies, e.g., the system log
will not be saved properly and this may result in a file damage or loss.
3.3.2 Firmware
The Firmware tab is used for the 2N
®
LiftGate restart.
®
LiftGate firmware administration.
2N® LiftGate User Manual
60 / 85