Device Installation; Before You Start - 2N LiftGate User Manual

2. Device Installation

This section describes the 2N
Here is what you can find in this section:
•

2.1 Before You Start

• 2.2 Mechanical Installation
• 2.3 Electric Installation
• 2.4 Overview of Connectors
• 2.5 Overview of LED Indicators
• 2.6 RESET Button Function
• 2.7 Retrieval of 2N® LiftGate in Network by 2N® Network Scanner
2.1 Before You Start
Product Completeness Check
Check before installation whether the package of the 2N
following:
1x
2N
2 pcs + 2 pcs Dowel (8 x 40 mm) with screws (4.5 x 50 mm)
1 pc Antenna
1 pc Battery pack
1 pc Brief Manual
Installation Conditions
®
• 2N Liftgate is designed for vertical mounting.
®
• Install 2N LiftGate with respect to the signal strength – check the LED indicator status or
display the information via the device web interface.
• For the allowed range of operating temperatures refer to Section
®
• 2N LiftGate may not be operated on sites exposed to direct solar radiation or near heat
sources.
®
• 2N LiftGate is designed for indoor applications. It may not be exposed to rain, flowing
water, condensing moisture, fog, etc.
®
• 2N LiftGate may not be exposed to aggressive gas, acid vapors, solvents, etc.
• Make sure there is enough free space above and under 2N
flowing air to conduct heat away.
®
LiftGate product and its installation.
®
LiftGate Main Unit
2N® LiftGate User Manual
®
LiftGate Main Unit includes the
5. Technical
®
LiftGate for cabling and
Parameters.
12 / 85