Reset Button Function - 2N LiftGate User Manual

CABIN SWITCH 3 &
4
Indicates the states
of connected
cabin switches 3, 4.
Slow flashing
Fast flashing
Short flashing

2.6 RESET Button Function

The RESET button located on the 2N
restart of the device. Remove the main unit upper cover to get access to the button. The button
is to the right of the LTE module above the antenna connectors.
LED Indicators
• Blue, slow flashing – voltage OK, disconnected (no consumption)
• Red – source warning (overconsumption, current > 750 mA)
• Red, fast flashing – voltage error (consumed current > 1050
mA, overload or short-circuit)
• No light signaling – the cabin switch is unavailable, the device is
supported by 2 cabin switches only
NOTE: device version with 2-cabin switch support (2xCS) on positions
1 and 2. The 4-cabin switch support device version (4xCS) supports all
the 4 positions.
Flashing Frequencies
Flashes 1:1, interval 1 s = 0.5 s light on (ON) + 0.5 s no light (OFF)
Flashes 1:1, interval 0.2 s = 0.1 s light on (ON) + 0.1 s no light (OFF)
Interval 4 s = 0.2 s light on (ON) + 3.8 s no light (OFF)
®
Liftgate motherboard is used for factory default reset or
2N® LiftGate User Manual
20 / 85