Table of Contents
Advertisement
Menu
Screen
7
PR-8 Riveter
Function
Displays Pro Spot Logo. Only comes on
when the tool is first started. A press of the
trigger button after the tool has been idle, or
a new battery has been docked in the tool
will bring up the Splash Screen.
Display these parameters:
• Battery Level
• F: Current Force
• Fn: Force Set-point
Displays this information:
• t= Tool Hours in use
• Q= Tool Energy Used
• n= Tool Cycles performed
Displays recommended Service Milestone
• # of Cycles Until Service
• # of Days Until Service
Displays the Current User / Recipe.
Allows switching between 4 different Users,
which have their own Force Value.
Displays Firmware version,
serial number.
Get here by holding left/right down while in
Main Screen.
Allows user to set preferred units. Options
are: kN, lbf, bar, psi
Change is made by ticking the Trigger with
the desired unit highlighted.
Enter this menu by holding down Left/Right
buttons when in the UNIT EDIT menu.
Allows the user to set the target force value,
from 20kN to 80kN.
Change is made after ticking the
Trigger after editing the force to the
desired value.
Allows the user selected "Current User".
Each of the 5 Users can have their own
Force Setting
Enter this menu by holding down Left/Right
buttons when in the User Select menu
Set the user by ticking the Trigger button
All Info Copyright © Pro Spot International Inc.
Left Button
Right Button
Action
Action
N/A
N/A
Moves to
Moves to
CYCLE
INFO - PG 5
COUNT
- PG 2
Moves to
Moves to
Service Info
MAIN PG 1
- PG 3
Moves to
Moves to
USER
CYCLE
RECIPE
COUNT
SELECT
- PG 2
- PG 4
Moves to
Moves to FW
Service Info -
Info - PG 5
PG 3
Moves to
USER
Moves to
RECIPE
MAIN PG 1
SELECT
- PG 4
Cycle to
Cycle to
PREVIOUS
NEXT unit
unit
Decrease set
Increase set
force value
force value
Moves to
Moves to
PREVIOUS
Next User
User
Hold Left/Right
Button Action
N/A
Enter EDIT UNITS
N/A
N/A
Enter Change
User Page
N/A
Moves to FORCE
EDIT
N/A
N/A
Advertisement
Table of Contents
