Table of Contents
Advertisement
1 .0
1.1 Work Environment
WARNING! Do not operate or place the riveter near water, in wet locations or outdoors . Risk for injuries
or damage to the riveter .
WARNING! Do not place the riveter on unstable or uneven surface . The riveter might fall causing personal
injuries or damage to the riveter .
• Keep the work place clean and free of debris to prevent accidents .
• Keep this device away from children and unauthorized or untrained personnel .
• Store this device in a clean environment . Keep away from high temperatures,
corrosive liquids and gases that could damage the equipment .
• Never use or charge this device in an environment with flammable and explosive
liquid, gas or dust .
1.2 Electrical Safety
WARNING! All electrical connections must be made by a qualified electrician. Risk for electrical shock .
• Always match the charger plug with the wall socket . Never modify the plug .
• The PR-8 Riveter and all of its components should never be exposed to wet or
extremely humid environments. Exposing any part of the electrical system to
water will increase the risk of electrical shock .
• Always unplug the charger during a lightning storm .
• Never burn or short circuit the battery . Always dispose of batteries properly .
1.3 Personal Safety
WARNING! Make sure to use safety goggles when using the riveter .
WARNING! The PR-8 Riveter may only be used by qualified personnel. The user of the riveter must have
knowledge of riveting and of alignment of collision-damaged vehicles . .
• Keep focused and alert while operating the device . Never use it when you
are tired or under the influence of medication or alcohol.
• Wear slip-proof gloves and safety glasses while operating the device .
• Never put your fingers between the jaws. Serious injury may occur.
3
SAFETY
All Info Copyright © Pro Spot International Inc.
Advertisement
Table of Contents
