Table of Contents
Advertisement
5 .5
5.6
Calibration Hole Procedure:
5.6 Calibration Hole
1 . Align the calibration dies in the center of hole .
Procedure:
2. Complete pressure cycle to make exact hole size and collect the punch ring for reuse.
3 . The hole is now ready for Flow Form rivet installation .
1. Align the calibration dies in the center of hole.
2. Complete pressure cycle to make exact hole size and collect the punch ring for reuse.
3. The hole is now ready for Flow Form rivet installation.
SOFTER MATERIAL
(ALUMINUM)
For Instructional Videos:
https://www.youtube.com/c/Prospotwelding
APPLICATION OF THE DIE SETS
APPLICATION OF THE DIE SETS
HARDEST MATERIAL
(STEEL)
Gun Side
1
2
Arm Side
Punch Ring
All Info Copyright © Pro Spot International Inc.
3
CALIBRATION DIE (FEMALE)
ATTACHED TO MOVING
(RAM) SIDE OF GUN
CALIBRATION RING
CALIBRATION MANDREL
16
Advertisement
Table of Contents
