Page 2
& development department, a fabrication facility and production lines for the various welders Pro Spot International exports its products worldwide, export sales are managed through our headquarter office. The company owns numerous patents for our ingenious application tools, machines, and procedures.
Table of Contents 1.0 Safety 1.1 Work Environment 1.2 Electrical Safety 1.3 Personal Safety 2.0 Technical 2.1 Technical Speci cations 2.2 Aditional Arms and Options 2.3 Product Identi cation 2.4 Functionality 2.5 Options: Deep U Clamp S-5000 3.0 Before Using The Device 3.1 Battery Charging 3.2 Device Operation 4.0 Maintenance and Repair...
Thank you for choosing Pro Spot’s PR-5 Cordless Rivet System. This device utilizes a high quality lithium battery to power the micro-programmed control unit (MCU), and the ultra-high hydraulic pressure system. The PR-5 is simple to learn, easy to use, safe and very efficient. It is recommended for aluminum alloy car bodies. 2.1 Technical Speci cations:...
For Removing Rivets For Flattening PRR-10 + PRR-11 PRR-12 + PRR-13 PRR-14 + PRR-14 (5mm) (3mm) 2.4 Functionality • Electro-hydraulic operation, portable and easy to operate. • Different sized arms are available for various applications. • Arms rotate 360° for use at various angles. •...
3.0 Before Using This Device Before using the PR-5 Cordless Rivet System, perform a visual check of the charger, the batteries and the entire rivet gun along with the arms, punches and dies. This visual inspection should be done before each use. Verify that the connection for the battery is good.
5.0 Application of the Punch and Die Sets • This device includes 10 punch/dies: PRR-10, PRR-11, PRR-12, PRR-13, PRR-14, PRR-15, PRR-16, PRR-17, PRR-18, PRR-19 • The punch and dies must be screwed in completely to the arm and the gun. During use, the pressure must not be on the threads of the dies.
Need help?
Do you have a question about the PR-5 and is the answer not in the manual?
Questions and answers