6 .0
1.1 Work Environment
WARNING! All service and maintenance must be carried out by Pro Spot service
personnel and service support . Risk for electrical shock .
Do not disassemble any of the components without authorization . Any damage
caused by misuse or disassembly is not covered under warranty .
• Keep the rivet gun dry . If the device happens to get wet, remove the
battery and only install the battery after the entire rivet gun is completely dry .
• Do not use or store the device in extreme hot or cold temperatures. Both
conditions will cause plastic housing to deform, shorten the service life of
the electronic components and damage the battery .
• CLEAN ADHESIVE RESIDUE PRIOR TO SETTING/DRYING ON TOOL .
For Instructional Videos:
https://www.youtube.com/c/Prospotwelding
MAINTENANCE AND REPAIR
All Info Copyright © Pro Spot International Inc.
18