5 .6
Flow Form Installation Procedure:
5.7
1 . Place Flow Form rivet in calibrated hole .
2. Align head side die with flow form die.
5.7 Flow Form Installation
3 . The installation of the Flow Form rivet is now completed .
Procedure:
1. Place Flow Form rivet in calibrated hole.
2. Align head side die with flow form die.
3. The installation of the Flow Form rivet is now completed.
FLOW FORM RIVET
HEAD SIDE
INSERT IN HOLE
PRIOR TO RIVETING
17
APPLICATION OF THE DIE SETS
APPLICATION OF THE DIE SETS
FLOW FORM DIE,
HEAD SIDE
1
Gun Side
2
Arm Side
All Info Copyright © Pro Spot International Inc.
3
FLOW FORM DIE,
FORMING SIDE