4 .0
The PR-8 features a modular C-Arm and accessory quick change system . To switch between various arm sizes and
other optional accessories, remove the lock nut and swap out arm as shown in diagram below .
- Slide desired arm onto arm adapter against o-rings .
- Thread the lock nut onto arm adapter finger tight.
- Use supplied wrech to tighten
- Arm is now secure .
- Reverse steps to remove arm .
C-ARM
LOCK NUT
9
MODULAR C-ARM ATTACH & REMOVE
ARM ADAPTER
O-RINGS
All Info Copyright © Pro Spot International Inc.
Compatibility with PR-5
PR-5 C-Arms are
NOT
rated to the high force
that can be applied with the new 80kN tool .