Page 1
Please read this instruc�on manual first before opera�ng the drone. CONTACT INFORMATION Please keep this manual for future use. E-Mail: support@con�xo.com Website: www.con�xo.com CONTIXO is a trademark of Con�xo Inc. F30 4K GPS DRONE 2020 Con�xo Inc. All Rights Reserved.
Page 2
Safety First Always follow proper opera�ng procedures and safe-flight guidelines Please read this instruc�on manual carefully before flights for important informa�on regarding product func�ons and opera�on �ps. It is important to learn how to use the product to achieve a safe flight. Stay informed of local laws and regula�ons regarding flying this product and always abide by the law.
Table of Contents What’s in the Box 3. What’s in the Box 24. Low Ba�ery Warning Products/ Spare Parts Included In The Box 3. Technical Parameters of the Drone 25. Signal Strength Indicator • 1 Drone • 1 Remote Control 3.
Drone Ba�ery Charging Open the Phone Holder How to Charge the Drone Ba�ery: 1. Pull out the mobile phone holder upwards completely (Pic. 1); ● Please charge the ba�ery fully before using it. 2. Tilt the holder 30 degrees towards you and then you will hear a click ●...
Unfold the Drone Product Assembly The Aircra� is folded inside the package. Follow the steps as below to unfold the aircra�. A�en�on: Please install all fi�ngs step by step as below pictures. Keep Step 1: Unfold the front arms (Pic. 1); in mind that the propellers are dis�nguished by A &...
How to Power on/off the Drone Short-press the aircra�’s power bu�on, it will turn on, in the same �me, the aircra� will have power-on sound and indicator light stays on. Long-press the power bu�on for 3 seconds, the aircra� will turn off and indicator light will turn off...
Remote Controller Signal Connec�on Remote Controller Ba�ery Installa�on Step 1: Unfold the hand s�cks and open the ba�ery door (Pic. 1); NOTE - Please make sure that the drone is turned off Step 2: Install 2*AA ba�eries into the ba�ery compartment according to All you need to do is simultaneously press and hold the “Red Lock/Unlock”...
Control Mode Selec�on (Op�ons) Control Mode Selec�on (con�nued) Step 1. Keep pressing the red bu�on “ ” and turn on the remote controller, the remote controller is under signal connec�on status (Pic. 1); Step 2. Keep pressing the RTH bu�on “ ” for 3 seconds to choose the thro�le Forward/ control mode (Pic.
Remote Control Status Indicator Camera Status Meaning Product Assembly cont. Short-press the bu�on indicated as below, the camera icon “ ” on the LCD The remote controller is under Signal Indicator lights “ ” flash screen flashes once, the camera takes one photo; Connec�on Status.
Drone Ini�aliza�on Detec�on Drone Compass Calibra�on (con�nued) A�er Signal Connec�on has been successful, the drone enters the Step 2) Ver�cal Calibra�on ini�aliza�on detec�on procedure. Make sure that the drone is set on a Hold the drone ver�cally with its front (camera) facing up and rotate it 360 flat and level surface for this step.
How to Lock and Unlock the Drone (con�nued) Gyroscope Calibra�on Locking the Drone: Once the drone has been calibrated, set drone on a flat surface. Now, push There are 3 methods to control the drone in case of event of the following situa�on. down both of the control s�cks to the lower-le�...
Flight Modes One-Key Takeoff/ Landing 1. A�er the drone is unlocked, press the “ ” bu�on (as indicated Manual Controls: below). The drone will automa�cally start hovering up to an al�tude of Switch or slide the GPS bu�on to the down. This will turn off the GPS func�on between 5-9 feet.
Page 13
Flight Modes (con�nued) Flight Modes (con�nued) Return-to-Home (RTH) procedure brings the drone back to the last Fail-Safe Return recorded Home Point. There are 3 types of RTH procedures: Smart RTH, Fail-Safe RTH will be triggered if the remote controller signal is lost for more Fail-Safe RTH and Low Ba�ery RTH.
Capturing Photos and Videos Signal Strength Indicator Photo: Signal Strength icon shows the strength of the received signal. The more, To capture breathtaking photos, simply short-press the Photo/ Video bu�on. the be�er. If the signal is weak or irregular, then please do not fly the The LCD screen camera icon will flash once and the remote will beep once drone in the same area.
Turn on the drone. Then, enter your smartphone’s SETTINGS op�on. Turn on Wi-Fi, find “ Con�xo F30-XXXX ” on the list and connect your device to that Wi-Fi signal. Make sure that your smartphone and the drone have successfully connect- "M RC PRO"...
Page 16
Smartphone Applica�on (con�nued) Smartphone Applica�on (con�nued) Tap on the “CLICK” bu�on. Tap on the “ ” bu�on on the right hand corner to enter the gallery, you are now ready to use your app to record videos/picture taking to your gallery or remove it.
Page 17
Smartphone Applica�on (con�nued) Smartphone Applica�on (con�nued) Gallery Viewer You can view all of your captured files via the "M RC PRO" App interface. GPS Signal: The number in the lower-right corner of Simply press the “Gallery” icon to enter the gallery interface. the icon shows the number of satellites that have been found.
Page 18
Smartphone Applica�on (con�nued) Smartphone Applica�on (con�nued) Aircra� Ba�ery Level: Display the power of the drone. Remote Controller Ba�ery Level: Display the power of the remote controller. Remote Controller Signal Strength: Display the Signal Connec�on between the remote controller and the drone. Signal Strength: Display the Signal Connec�on status between the smartphone 5G Wi-Fi and the drone camera.
Page 19
Smartphone Applica�on (con�nued) Smartphone Applica�on (con�nued) App joys�ck: Click to enter the App control mode. In this mode, RTH Switch (Return-To-Home) Icon: If a strong GPS signal is you can control your drone through “M RC PRO” APP in your available (more than 7 satellites displayed on the LCD screen) and smart phone.
Page 20
Smartphone Applica�on (con�nued) Troubleshoo�ng A Flight Path TapFly: With this feature enabled, you can switch between flying Orbit Flight: Press the “ ” switch and swipe the bu�on to the the drone with “by touch” (with your finger within the map ) or set right.
Troubleshoo�ng Troubleshoo�ng (con�nued) Status Meaning Meaning Status Indicator yellow light flash Aircra� 2.4GHz disconnected. Something wrong with the vision Indicator red light flash six fast. posi�oning module. �mes then stop for 1.5 Indicator yellow green red Aircra� is in ini�aliza�on detec�on seconds.
Vision System Vision System (con�nued) The measuring precision of op�cal flow system will be affected easily by the light The op�cal flow system consists of op�cal flow lens modules. The op�cal flow strength and the features of object surface texture. Once the op�cal flow is unavailable, system is an image posi�oning system, obtaining the aircra�’s posi�on through the aircra�...
Need help?
Do you have a question about the F30 and is the answer not in the manual?
Questions and answers