Contixo F10 Instruction Manual

TROUBLESHOOTING
@Nnxo'
F1O
DRONE
@
INSTRUCTION
JVIANUAL
lssue
Po$sibl6 Cas6 Sqluflon
The F10 will not
initialize
The F10 was moved
during initialization.
Turn the Fl
0
offthen back on again,
and ensure it does not move during
the ihitialization process.
Flight battery will not
charge
Poor connection
behreen the USB
cable and the flight
battery.
Check your connections on both the
USB cable and the flight battery.
F10 motors will nol
siart
F10 is ln No Fly
Zone.
Move at least 4 miles away from no
fly zone. lvlost major airports are no
fly zone areas.
F10
is
above 8,000
feet above
I\,4SL.
Move the F10 below 8,000 feei
above MSL.
lncorrect motor
startup procedure
Review Motor Starting/Stopping
procedure in manual.
F10
is
too close to
a
metal oblect or metal
surface-
Move the F10
alay
from large metal
olljects or surfaces.
F'10 beeps
constantly and
motors won't start
FMFRGENCY
Ivlode. Possibly due
to obstructed
propeller during
motor start up.
Check that nothing
is
obstructing any
propeller/motor, tum
the F10 off then
back on again.
F10
will
not hold
position in hover
Weak wireless
signal.
Conflrm that the flying area
has
1
00
degrees of clear view of the sky.
CONTACT
CONTIXO:
support@contixo.com
rrrrwnrv.contixo.com
CONTIXO is
a
trademark of Contixo
lnc.
o2016 Contixo lnc. All rights reserved.