Table of Contents
Advertisement
Additional functions
Demo mode
These functions enable the hob to be
demonstrated in showrooms without
heating up.
Activating/deactivating demo mode
When this mode is set, the hob can be
operated as normal.
Switch the hob on.
Place an induction-compatible item
of cookware on the hob.
Touch and hold the 0 and 2 sensor
controls on the numerical display at
the same time for 6 seconds.
In the timer display, flashes altern-
ately with (demo mode activated)
or (demo mode deactivated) for a
few seconds.
46
Displaying hob data
The model number and software ver-
sion of the hob can be displayed.
Model number/serial number
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 4 sensor
controls on the numerical display at
the same time.
Numbers will appear in the timer display
one after another, separated by a dash.
Example: (model number
KM 1234) – (serial num-
ber)
Software version
Switch the hob on.
Place an induction-compatible pan
on the hob.
Touch and hold the 0 and 3 sensor
controls on the numerical display at
the same time.
Numbers appear in the timer display:
Example: : = software version 2.00
Advertisement
Table of Contents
