Table of Contents
Advertisement
Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.
Switching on the hob
Touch the sensor.
Other sensors will light up.
If no further entry is made, the hob will
switch itself off after a few seconds for
safety reasons.
Setting the power level
Permanent pan recognition is activ-
ated as standard (see "Programming").
When the hob is switched on and you
place an item of cookware on one of
the cooking zones, all the sensors for
that cooking zone's numerical display
will light up.
Place the cookware on the cooking
zone you want to use.
Touch the appropriate sensor control
on the numerical display for the
power level you want.
Changing the power level
Touch the relevant cooking zone dis-
play.
The cooking zone display appears
brighter.
Touch the appropriate sensor control
on the numerical display for the
power level you want.
Switching off a cooking zone/
the hob
Switching off a cooking zone
Touch and hold the relevant cooking
zone display until the cooking zone
switches off.
or
Touch the relevant cooking zone dis-
play.
The cooking zone display appears
brighter.
Touch the 0 sensor control on the nu-
merical display.
Switching the hob off
To switch off the hob and all the
cooking zones, touch the sensor
control.
Operation
35
Advertisement
Table of Contents
