Miele KMDA 7272 FR-A Operating And Installation Instructions page 83

Worktop depth greater than 600 mm
KMDA 7272 FR-U
a For maintenance work it must be
possible to remove the rear cabinet
wall.
The cabinet wall and an adjoining
room wall or a piece of furniture
must be at least 25 mm apart to en-
sure sufficient room for the ducting.
If the rear cabinet wall is > 555 mm
away from the front of the worktop,
the Plug&Play adapter must be com-
bined with an expansion set from
Miele.
b The removable drip tray and the
cleaning flap must be accessible
after installation.
c The cross-section of the ventilation
opening must be at least 425 cm².
x Dimension of which the worktop is
deeper than 600 mm.
KMDA 7272 FL-U
a For maintenance work it must be
possible to remove the rear cabinet
wall.
The cabinet wall and an adjoining
room wall or a piece of furniture
must be at least 25 mm apart to en-
sure sufficient room for the ducting.
If the rear cabinet wall is > 555 mm
away from the front of the worktop,
the Plug&Play adapter must be com-
bined with an expansion set from
Miele.
b The removable drip tray and the
cleaning flap must be accessible
after installation.
c The cross-section of the ventilation
opening must be at least 425 cm².
x Dimension of which the worktop is
deeper than 600 mm.
Installation
83