Advantech PCE-3032 User Manual page 52

USB Mass Storage Driver Support

Enable/Disable USB Mass Storage Driver Support.
Device reset time-out

USB mass storage device start Unit command time-out
Device power-up delay

Maximum time the device will take before it properly reports itself to the Host
Controller. "Auto" uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
3.2.2.14 Network Stack Configuration
Network stack

Enable/Disable UEFI Network Stack.
PCE-3032/4132 User Manual
Figure 3.17 Network Stack Configuration
42