Advertisement
Congratulations on your new SCAN DSA fire cassette. We are confident that you will enjoy your new cassette,
especially if you follow the instructions and advice given below.
An original SCAN DSA cassette is delivered with a sign with the following information: Type of cassette,
output, approvals, and registration number .
INSTRUCTIONS FOR INSTALLATION
In the SCAN DSA cassette you will find the following:
1 oven mitten
1 handle to operate the shaking grate (SCAN DSA 3)
Fitting for the flue collar
1 set of screws and hexagon spanners
Firelighters for the first lighting
Before the Cassette is Connected to the Chimney:
Contact your local authorities to obtain the existing fire- and building regulations regarding the installation, or
ask your local experts in that field, e.g., the chimney sweep, to install your cassette. All SCAN DSA cassettes are
closed fireplaces.
Mounting of the connecting piece:
The connecting piece is fastened underneath the top plate.
CONNECTION TO THE CHIMNEY
We recommend that the cassette is installed by a professional stove/fireplace dealer. The cassette should not be
connected to a chimney of which the inside diameter is smaller than 175 cm
Regarding chimney draught: please see Instruction for Use.
Please note that the cassette, chimney and pipe should be installed in a way that they can be cleaned easily.
INSTRUCTION FOR USE
Type of wood and normal amount of fuel, as well as information for the
chimney calculation:
Type of Cassette
Connecting
SCAN DSA
3
4
Temporary information as regards the DS-Approval (Denmark).
Output
piece
kW
Ø mm
150
6
150
6
2
(ø 150 mm).
Amount of fuel
kg/h
(maximum)
2,1
2,1
2
Chimney draught
Pa
(minimum)
15
15
Advertisement
