Table of Contents
Advertisement
SAFETY INFORMATION: Always read before proceeding
These instructions contain both information and warnings that are
necessary for the safe operation and maintenance of this product. It is
recommended that you read the instructions carefully and ensure that the
contents are fully understood. Failure to understand and to comply with the
warnings and instructions can result in serious injury, damage or even death.
In order to avoid the danger of electrical shock, it is important that proper
safety measures are taken when working with voltages exceedingthe extra
low voltage (ELV) limit of 50VAC RMS or 120V DC.
This product must only be used by a competent person capable of
interpreting the results under the conditions and for the purposes for which
it has been constructed. Particular attention should be paid to the Warnings,
Precautions and Technical Specifications. Always check the unit is in good
working order before use and that there are no signs of damage to it. Do not
use if damaged.
Where applicable other safety measures such as use of protective gloves,
goggles etc. should be employed.
Please keep these instructions for future reference. Updated instructions and
product information are available at: www.martindale-electric.co.uk/instruct
REMEMBER: SAFETY IS NO ACCIDENT
MEANING OF SYMBOLS AND MARKINGS:
Caution - risk of danger & refer to instructions
Caution - risk of electric shock
Equipment complies with relevant Directives
Equipment complies with relevant UK Conformity
Assessed marking
End of life disposal of this equipment should be in
accordance with relevant Directive
Advertisement
Table of Contents
