Related Manuals for ZKTeco SC800
Summary of Contents for ZKTeco SC800
- Page 1 Quick Start Guide SC800 Version: 1.1 Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
-
Page 2: Terminal Block
Overview Breathing Light 2.4-inch Color Screen Hidden Touch Keypad Speaker Reset 85mm Terminal Block 485A 485B WD0-OUT WD1-OUT INWD0 INWD1 12V-OUT TX232 RX232 BELL+ BELL- 12VIN PGND PGND... -
Page 3: Installation Environment
Installation Environment Please refer to the following recommendations for installation. 10ft KEEP DISTANCE AVOID GLASS AVOID DIRECT AVOID USE OF REFRACTION SUNLIGHT ANY HEAT SOURCE AND EXPOSURE NEAR THE DEVICE Device Installation Stick the mounting template sticker to the wall drill holes according to the ①... -
Page 4: Standalone Installation
Standalone Installation Smoke Alarm Detector Door Sensor Exit Button Reader Lock ZKBio Access IVS TCP/IP ZKBioTime 8.0 Power Connection Recommended AC Adapter 12V ± 10%, at least 3A. To share the power with other devices, use an AC Adapter with higher current ratings. -
Page 5: Ethernet Connection
Ethernet Connection Connect the device and computer over an Ethernet cable as shown in the figure: ZKBio Access IVS ZKBioTime 8.0 Default IP address: 192.168.1.201 IP address: 192.168.1.130 Subnet mask: 255.255.255.0 Subnet mask: 255.255.255.0 Tap on [COMM.] > [Ethernet] > [IP Address] , then enter the IP address and tap on [OK]. - Page 6 RS485 Connection 485+ 485A 485- 485B WD0-OUT +12V WD1-OUT INWD0 485 Reader INWD1 12V-OUT TX232 RX232 Door Sensor, Exit Button, Alarm & Auxiliary Connection Door Sensor ExitButton Smoke Detector BELL+ Alarm Power BELL- Alarm...
-
Page 7: Lock Relay Connection
Lock Relay Connection The system supports Normally Opened Lock and Normally Closed Lock. The NO LOCK (normally unlocked when power ON) is connected 'NO' and 'COM' terminals, and the NC LOCK (normally locked when power ON) is connected 'NC' and 'COM' terminals. Consider the following NC Lock as an example: 1) Device not sharing power with the lock 2) Device sharing power with the lock... -
Page 8: New User Registration
New User Registration Tap on the [M/OK] key to enter the main menu if the device is not set up with a super administrator. Create a new user and set the User Role to Super Admin, then the system requests for the administrator’s verification before entering the menu. It is recommended to register a super administrator initially for security purposes. - Page 9 Searched devices count:1 Total Progress Number of devices added:1 Device Operation Log IP Address Serial Number IP Address Serial Number Device Type Operations SC800 172.31.1.10 66984210********* Step 5 Device Name SC800 Serial Number 6698******** IP Address Basic Information Attendance Area...
- Page 10 Method 3: Register on the phone: Once the ZKBio Access IVS software is installed, the users could enroll their face via a browser application on their own mobile phone. Click [Personnel] > [Parameters], enter ‘’http://Server address: Port’’ in the QR Code URL bar.
- Page 11 Ethernet and Cloud Server Settings Tap on [M/OK] > [COMM.] > [Ethernet] to set the network parameters. If the TCP/IP communication of the device is successful, the icon will be displayed in the upper right corner of the standby interface. Tap on [M/OK] >...
-
Page 12: Access Control
Access Control Tap on [M/OK] > [Access Control] to enter the access control interface and set relevant parameters of access control. Attendance Search [M/OK] > [Attendance Search] to enter the Personal Record Search, then enter the user ID and time range to view the corresponding attendance record. -
Page 13: Card Management
Device Type Settings Tap on [M/OK] > [System] > [Device Type Settings] > [Device Type] to configure the device type settings. Card Management The device supports multi-card management function. Tap on [M/OK] > [System] > [Card Management] to select required card type. -
Page 14: Login Webserver
Login WebServer The configured network login allows the Webserver can remotely view the information of the device (hardware, software, capacity, and data, etc.), set up the system (communication, access control, and system functions, etc.), add users and upgrade the system. Open a browser and enter the address https:// Serial IP Address:1443 to log in to the WebServer, for example: https://192.168.1.201:1443. -
Page 15: Forgot Password
Note: After log in for the first time, users must reset their original password and log in again before they can use it. To retrieve the password easily, please register a super admin first. Forgot Password Method 1 (When there is a super admin): If you forgot the password of WebServer, the registered super admin can reset it for you. - Page 16 Method 2 (When there is no super admin): If the network of the device is normal and ZKBio Access IVS / ZKBioTime 8.0 has been connected, you can reset the password by sending the super admin account and password from the server. Click [Personnel] >...
- Page 17 New User Registration Clickthe [All Users] on the WebServer to register a new user. User ID, name, password, and card number must be entered, along with setting the user role and access control role. Step 2 Step 1 Enter the User Info.
- Page 18 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved.
Need help?
Do you have a question about the SC800 and is the answer not in the manual?
Questions and answers