Table of Contents
Advertisement
Open the appliance door slightly, then refit the pan-
9.
els and screw them in place, first at the top and
then at the bottom.
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
24.10 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
Lift the appliance slightly and pull it out completely.
3.
Installation instructions en
41
Advertisement
Table of Contents
