Table of Contents
Advertisement
• Management VLAN
Quality of Service
Ingress/Egress Bandwidth control on TP / Fiber port
4 priority queues, strict priority and Weighted Round Robin (WRR)
Traffic classification by:
• IEEE 802.1p Class of Service
• IP DSCP priority
• IP Address priority
Management
Built-in IP-based Web interface for remote management
SNMP v1 / v2c and 4 RMON groups
Event trap and SNMP trap support
Manual IP address setting / DHCP client for IP address assignment
TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
16 TCP / UDP Filter groups
Password setting, IP setting and devices description setting through Planet Smart discovery utility
Firmware upgrade via remote Web interface
Reset Button at the front panel for the factory default reset
1.6 Product Specification
Product
Hardware Specification
Copper Interface
Optic Interface
Optical Mode
Optic Wavelength
MAX.
Launch
Power(dBm)
Min.
Receive Sensitivity
Maximum Input power
Twisted-pair
Speed
Fiber-optic
Twisted-pair
Cable
Fiber-optic
Cable
LED indicator
IGT-902
IGT-902T
1 x 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X ports
Multi-mode
850nm
-4 dBm
-9.5 dBm
-13.5 dBm
-18 dBm
10/20Mbps for Half / Full-Duplex
100/200Mbps for Half / Full-Duplex
2000Mbps for Full-Duplex
2000Mbps for Full-Duplex
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
1000Base-T: 4-pair STP Cat 5,6 up to 100m
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
9/125μm single-mode cable, provides long distance for
10/15/20/30/40/50/60/70/120km (very on fiber transceiver or SFP module)
Power: P1, P2, Fault
TP: LNK/ACT, 1000
Fiber: LNK/ACT
-8-
IGT-902S
IGT-902TS
SC
Single mode
1310nm
-3 dm
-9.5dBm
-14.4 dBm
-20 dBm
User's Manual of IGT-90x
IGT-905A
SFP
Vary on
module
-*
-*
-*
-*
-*
Advertisement
Table of Contents
