Product Specification - Planet GT-902 User Manual

802.1p Tag Priority / IP address priority / IP DSCP option in Quality of Service Mode and Strict Priority /
Weighted Round Robin (WRR) QoS policies
TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
16 TCP / UDP Filter groups
Password setting, IP setting and devices description setting through Planet Smart discovery utility
Firmware upgrade via remote Web interface
External DC 5V 2A power supply
Compact in size, easy installation
LED indicators for easy network diagnosing
Reset Button at the front panel for resetting the factory default
Choice of fiber-connector from SC, LC, WDM, multi-mode / single-mode fiber /1000Base-SX / LX mini GBIC
module

1.5 PRODUCT SPECIFICATION

Model
Hardware Specification
Standards
Ports
Copper Interface
Optic Interface
Optic Wavelength
Max.
Launch
Power(dBm)
Min.
Receive Sensitivity
Maximum Input power
Twisted-pair
Speed
Fiber-optic
Twisted-pair
Cable
Fiber-optic
Cable
LED Indicator
Power Consumption
Power Input
GT-902 GT-902S
IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX
IEEE 802.3ab, 1000Base-T
IEEE 802.3z, 1000Base-SX/LX
1 x 10/100/1000Base-T port,
1 x 1000Base-SX/LX / LX WDM port
1 x 1000Base-SX/LX SFP slot
RJ-45 port (Auto-MDI/MDI-X) Twisted Pair
SC
850nm 1310nm
-4 dBm -3 dBm
-9.5 dBm -9.5dBm
-13.5 dBm -14.4 dBm
-18 dBm -20 dBm
10/20Mbps for Half / Full-Duplex
100/200Mbps for Half / Full-Duplex
2000Mbps for Full-Duplex
2000Mbps for Full-Duplex
10Base-T: 2-pair UTP Cat. 3,4,5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
1000Base-T: 4-pair STP Cat 5 up to 100m
50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m.
9/125μm single-mode cable, provides long distance for
10/15/20/30/40/50/70/120km (very on fiber transceiver or SFP module)
PWR,
TP LINK/ACT, 1000
Fiber LINK/ACT
3.8 Watts/ 13 BTU (maximum)
DC 5V / 2A
GT-905A GT-906A15
SFP
TX:1310nm
-
RX:1550nm
-
-3 dBm
-
-9 dBm
- -21 dBm
- -3 dBm
-4-
GT-906B15
WDM
TX:1550nm
RX:1310nm
+5 dBm
0 dBm
-25 dBm
-3 dBm