Multitech ISIHI-2S User Manual page 68

Modem Responses
(Result Codes)
Online Connection
RS-232 Interface Controls
Error Correction & Data
Compression
Immediate Action
Flow Control, p. 146
Escape Sequences, p. 149
E Echo command mode characters
Q Result codes: enable/disable
V Result codes: verbose/terse
\V rotocol result code
X Result codes and call progress
&Q Select asynchronous communications mode
B Answer tone
C Carrier control
F Echo online data characters
&G Guard tones
-C Data calling tone
N Modulation handshake
\T Disable inactivity timer
Y Long space disconnect
&C Carrier Detect control
&D Data Terminal Readycontrol
&S Data Set Ready control
\N0 or &Q6 Non-error correction mode
\N3 Auto-reliable mode
\N2 Reliable mode
%C0 Data compression disabled
%C1 Data compression enabled
A/ Repeat last command
I Information request
&B V.32 auto retrain
&V View current configuration
&M0 Asynchronous mode
&K0 or \Q0 Flow control disabled
&K3 or \Q3 Hardware flow control
&K4 or \Q1 XON/XOFF flow control
\X0 XON/XOFF no pass-through
&J Auxiliary relay control
\J Enable data buffer control
\G Modem port flow control
\K Set break control
+++AT<cr> Default in-band escape sequence
A Force answer mode
O Go back online
Chapter 5 - AT Commands
68