Introduction; Computer Requirements; Shipping Contents; Safety Warnings - Multitech ISIHI-2S User Manual

2.1

Introduction

This section describes how to install the ISIHx server card into the expansion slot in your PC.
2.2

Computer Requirements

•
Pentium-based PC or compatible (PCI bus required for ISIHP; ISA required for ISIHI)
•
Microsoft Windows 2000, Windows 98, Windows Me, Windows NT versions 3.51 and 4.0, SCO Open
Server version 5.0, Novell NetWare, or Linux
•
CD-ROM drive, floppy disk drive (for use in cases where drivers are downloaded from web site)
•
800 blocks of hard disk space for UNIX, 100K bytes for Windows NT, 50K bytes for Novell
2.3

Shipping Contents

•
ISIHx card
•
RJ-45 ISDN cords (1 for ISIHP-1S; 2 for ISIHx-2S/2U; 4 for ISIHP-4S/4U/4SD)
•
ISI Product Family CD-ROM (containing drivers, utilities, & documentation)
•
Quick Start Guide
2.4

Safety Warnings

1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jacks are specifically designed for wet locations.
3. This product is to be used with UL and cUL listed computers.
4. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at
the network interface.
5. Use caution when installing or modifying telephone lines.
6. Avoid using a telephone (other than cordless type) during an electrical storm. There may be a remote risk
of electrical shock from lightning.
7. Do not use the telephone to report a gas leak in the vicinity of that leak.
8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunication line Cord.
Chapter 2 - Hardware Installation
12