Chapter 8 - Setting Country/Regional Codes - Multitech MT5600BA-V92 At Commands Reference Manual

Country/Regional Codes
The Default Country/Regional Code is B5.
If You Want to Change the Country/Regional Code
1. View the List of Available Country/Regional Codes by executing the command AT+GCI=?<CR>
2. Set and save the code by executing the command AT+GCI=nn<CR>
Note: nn is the country/regional code. See the country/regional code list on the Multi-Tech Web site
3. OK is displayed.
4. The country code is then displayed (see the example below).
To Verify the Country Code
1. Type AT+GCI?<CR>, or you can type ATI5<CR>
Example
T
1. ype the command AT+GCI=B5<CR>
2. Verify B5 was set by typing AT+GCI?<CR> or ATI5<CR>
3. B5 indicates the configuration is set for any B5 country such as Canada or the United States, etc.
Countries/Regions Supported
See the list on the Multi-Tech Web site of countries and regions supported.
Go to:
http://www.multitech.com/PRODUCTS/Info/approvals
Then click on global modems. The Global Modem Country/Region Approvals page displays. On this page you can
view approvals, configuration strings (which includes the country/regional code) and responses available in list form
by selecting the country/region and/or product.
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
Chapter 8 – Setting
Chapter 8 – Setting Country/Regional Codes
51