Chapter 8 - Setting Country Codes - Multitech SocketModem MT5600SMI-32 Developer's Manual

Chapter 8 – Setting Country Codes
The Default Country Code is B5.
If You Want to Change the Country Code
1. View the List of Available Country Codes by executing the command AT+GCI=?<CR>
2. Set and save the country code by executing the command AT+GCI=nn<CR>
Note: nn is the country code.
3. OK is displayed.
4. The country code is then displayed (see the example below).
To Verify the Country Code
1. Type AT+GCI?<CR>, or you can
type ATI5<CR>
Example
1. Type the command AT+GCI=B5<CR>
2. Verify B5 was set by typing AT+GCI?<CR> or ATI5<CR>
3. B5 indicates the configuration is set for any B5 country such as Canada or the United
States, etc.
Country Codes Supported
The list below describes the country code settings for the countries that Multi-Tech currently supports.
Country
Argentina
Australia
Austria
Belgium
Canada
China
Cyprus
Czech Republic
Denmark
Finland
France
Germany
Greece
Hong Kong
Hungary
Iceland
Indonesia
Ireland
Italy
Japan
Korea
Liechtenstein
Luxembourg
Mexico
Netherlands
New Zealand
Norway
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer's Guide
Country Code Country
07 Philippines
09 Portugal
FD Slovak Republic
FD Spain
B5 Sweden
B5 Switzerland
FD Taiwan
FD United Kingdom
FD United States
FD
FD
FD
FD
99
FD
FD
99
FD
FD
00
B5
FD
FD
B5
FD
7E
FD
Chapter 8 – Setting Country Codes
Country Code
B5
FD
FD
FD
FD
FD
FE
FD
B5
114